SOUTH YARRA SHOWROOM NOW OPEN

Sintered Stone Melbourne
Design Anywhere.

Most surfaces make you choose between beauty and durability.
Sintered Stone gives you both, without compromise.
Hot pots straight from the oven without cracking.
Wine, sauce or spice stains are a thing of the past, backed by a 25 year warranty.

14 Wilson Street, South Yarra VIC 3141 (03) 9122 8629 1300 161 388

Complimentary Samples Get Directions →

Melbourne

Melbourne's finest collection of sintered stone.

Asetica is active in Melbourne and growing fast. The full collection of sintered stone is available throughout Victoria, for prestige kitchens in Toorak, facade cladding in South Yarra, bathroom wall lining in Brighton, and outdoor kitchens across the Mornington Peninsula.

Our South Yarra showroom at 14 Wilson Street is now open. Come and see full slabs, finishes and edge profiles in person, or order samples online and have them dispatched to your Melbourne address within 48 hours. If your project warrants a site visit or a detailed specification session, our team will come to you.

For specification enquiries, project briefs, or sample requests, our team responds same business day.

(03) 9122 8629 1300 161 388 0456 081 668 14 Wilson Street, South Yarra VIC 3141

Open Tuesday to Friday, 10am to 4pm. Saturday by appointment. Closed Sunday and Monday.

Visit Showroom

Why Melbourne designers specify it

0.05% Water absorption

Nothing soaks in

Oil, red wine and acidic food sit on the surface until you wipe them away. There is no sealing schedule to keep up with, at handover or in ten years.

7 Mohs hardness

Harder than granite

Daily contact with knives, cookware and grit leaves the surface intact.

400°C Heat contact rating

Take the pan straight off the cooktop

Put it down on the bench. The slab was fired three times hotter than your oven will ever get.

UV Colour stable outdoors

The same slab works inside and out

Colour holds through a full Melbourne summer, so an alfresco bench still matches the kitchen island it was cut alongside.

3200 × 1600mm slab size

Fewer joins to design around

Most islands and full-height splashbacks come out of a single piece.

25 Year warranty

Backed in writing

Every slab carries a 25 year surface warranty, and the material needs no sealing to keep it valid.

Featured Surfaces

Surfaces made for performance.

31 designs, each independently tested and certified. From dramatic marble-look whites to concrete-look greys, warm travertines to statement greens, every surface performs identically regardless of application.

Loro White

Matte · 12mm | 20mm · 3200 × 1600mm

Quartzite

Matte · 12mm | 20mm · 3200 × 1600mm

Essential Gold

Matte · 12mm | 20mm · 3200 × 1600mm

Taj Mahal Royal

Matte · 12mm | 20mm · 3200 × 1600mm

Travertino Pearl

3D Carved · 12mm | 20mm · 3200 × 1600mm

View Collection Order Samples →

Melbourne Showroom

South Yarra Showroom Now open.

14 Wilson Street, South Yarra VIC 3141

Tuesday to Friday, 10am to 4pm. Saturday by appointment. Closed Sunday and Monday.

Get Directions →

Order Samples Online

Browse the full collection at asetica.com.au and order physical samples of any surface. Delivered to your Melbourne address within 48 hours. Free for architects and trade professionals.

Speak with Our Team

Our specification team is available for Melbourne projects of any scale. Whether you need a material recommendation, a full spec pack, or a conversation about what works for your build, we're here.

Visit our Studio

Come and see it at 14 Wilson Street, South Yarra, Tuesday to Friday between 10am and 4pm. We lay the full sheet out so you can read the veining at the scale it will run across your island, with a specification consultant on hand. For larger projects our team can also come to your site or studio.

Applications

One surface, every application.

Melbourne architects and premium builders specify Asetica for kitchens, bathrooms, facades and outdoor environments. One material that performs across every context, without compromise.

Kitchen & Benchtops

Heat + Scratch + Stain Resistant

Facades & Cladding

UV Stable, AS/NZS4284 Certified

Bathrooms & Wall Lining

Zero Porosity, Grout-Free

Outdoor & Alfresco

Warranted for All Conditions

Performance

Sintered stone does it all.

Most surfaces make you choose. Beauty or durability. Indoor or outdoor. High design or low maintenance. Sintered stone removes that compromise entirely.

Forged at 1200°C from 100% natural minerals, with zero resins or chemical binders. A surface that performs at the extremes of residential and architectural use, permanently, without asking anything of you in return.

Request Specification Pack

Asetica Surfaces Melbourne showroom in South Yarra, backlit signage on a sintered stone feature wall

Why Melbourne Specifies Asetica

Built for Melbourne's standards.

Melbourne's design industry sets the benchmark in Australia. The architects working in Toorak and South Yarra, the builders delivering prestige homes in Brighton and Hawthorn, the designers finishing apartments in Southbank and Fitzroy, they demand materials that match the ambition of the brief.

Sintered stone delivers at that level. A hardness of Mohs 7, zero porosity, UV-stable colour, and heat resistance to 400°C. It performs in Melbourne's variable climate, hot dry summers, cold wet winters, the daily thermal swings that expose weaknesses in lesser surfaces.

The full collection is available throughout Victoria. Samples delivered to Melbourne within 48 hours. Specification packs for every surface, including AS/NZS4284 certificates for facade applications. Our team handles Melbourne projects with the same support provided to clients in Perth and Sydney.

Serving All of Victoria

From inner Melbourne to the Mornington Peninsula, Geelong, the Yarra Valley and beyond. Asetica services Victorian projects of any scale.

48-Hour Sample Delivery

Physical samples of any surface delivered to your Melbourne address within 48 hours. Free for architects, designers and trade professionals.

Full Specification Support

Technical data sheets, compliance certificates, and material samples for every project. Our team supports Melbourne specifications the same as any other state.

AS/NZS4284 Certified

All facade products carry AS/NZS4284 certification, the standard required for compliant external cladding in Victoria and across Australia.

Melbourne Questions

Everything you need to know.

Where is the Asetica Melbourne showroom?

Our Melbourne showroom is at 14 Wilson Street, South Yarra VIC 3141, a few minutes from Toorak Road and Chapel Street. Full size slabs are on display so you can see the veining, finish and scale of a surface before you specify it.

What are your Melbourne opening hours?

Tuesday to Friday, 10am to 4pm. Saturday visits are by appointment. We are closed Sunday and Monday.

Do I need an appointment to visit?

No appointment is needed on weekdays, just come in. Saturday is by appointment only, and booking ahead any day means a specification consultant is free to walk you through the range. Email enquiries@asetica.com.au to book a tour.

Can I get samples delivered in Melbourne?

Yes. Samples are complimentary and dispatched to any Melbourne address, usually arriving within 48 hours. Order them from the collection page or ask our team to put a set together for a specific project.

Do you supply stonemasons and fabricators in Victoria?

Yes. Asetica supplies through a network of Victorian fabricators and stonemasons, who handle templating, cutting and installation. Talk to us about your project and we will point you to a fabricator who works with our material.

Does sintered stone suit outdoor use in Melbourne?

Yes. Sintered stone is non porous, UV stable and frost resistant, so it holds its colour through a Melbourne summer and does not absorb water through winter. It is used for alfresco benchtops, outdoor kitchens, pool surrounds and facades.

What is sintered stone made from?

Natural minerals, clays and mineral oxides, compacted under very high pressure and fired at around 1200 degrees. There is no resin binder, which is what gives it a hardness of Mohs 7, zero porosity and heat resistance to 400 degrees.

Discover

Book a personalised gallery tour.

A private walkthrough of the full collection with a surface consultant, texture, finishes and specification, tailored to your project. Prefer to simply drop by? Walk-ins are welcome Tuesday to Friday, 10am to 4pm.

Sintered Stone Melbourne
Design Anywhere.

Melbourne's finest collection of sintered stone.